Putanka Wire MZP Barrier Tank Barrier Low Visibility Obstacle Mesh Barrier Fence The Ultimate Choice For Unseen Security

A low-visibility wire fence (tangle) is a serious obstacle for wheeled and tracked vehicles. When you need a barrier that does its job without announcing its presence, low visibility wire is the solution. Engineered with thin, high-tensile wires and advanced non-reflective coatings, this system keeps your perimeter secure while remaining virtually undetectable to the untrained eye.

Rings are woven from galvanized or non-galvanized high-carbon wire GOST 7372-79 with a diameter of 0.5; 0.6; 0.8 and 0.9 mm.

Ring garlands are interconnected by wire twists from annealed wire with a diameter of 0.5-0.6 mm (GOST 3282-74). Pegs for fastening, rings for them are made from low-carbon wire.

If a person attempts to pass through the territory, they become entangled in it. Without outside help, it is impossible to escape from the tangle. Therefore, the offender remains safely waiting for the guard on the spot.

When armored vehicles or tanks pass through, the machine wraps around the wheels and turns into a pile of metal on the chassis, preventing it from moving further. And it is difficult to remove such a "gift" from the wheels.

Mainly use 0.5 -0.9mm thinner steel wire, after weaving by hand, with 25 grands, 30 circles, to form a complex wire barrier. After unload, it is 3D mesh barrier, with a size 10m long, 10m width, and 1.1-1.4m height. Use pin and rings to install and fix.

1/40HQ can load around 800 pcs of MZP(MPP) Low visibility wire.

MPP Plutanka is installed by 4-8 people on the ground, on a fence, on a building wall and on the roof of a building or structure.

In the lower tier there are garlands with a large diameter of wire.

The lower rings of the inconspicuous obstacle are attached to the ground with staples or other devices every 1-2 meters along the perimeter of the barrier.

The upper edge of the MPP Plutanka must be fixed on pegs to add volume and improve the barrier properties.